Kingston KVR16N11/8 8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 240-Pin DIMM Ram Memory

‹ ›

( Code: P60788 )

Deal: $ 54^.95 GST Inc.

$115.50 Save: $60.55 (52%) Availability: Out Of Stock (Coming Soon)

Shipped from Australia

Combine Shipping and Save
Save with shoppingsquare.com.au when you buy more, you save more!

We offer shipping discounts for multiple item purchases and checkouts.

Here's how it works.

For the first item or single item - it's full delivery price. But for each additional item
- Delivery charge less than or equals to $20: 50% off the delivery price
- Delivery charge greater than $20: $10 off the delivery price
That's a huge saving! So buy up, buy up. We work hard everyday to reduce unnecessary costs so that you save money and have more time to shop with us. We love to see you back.

Our shipping costs also include full transit insurance to protect your purchase in the unlikely event that your order is lost in transit. We're always looking out for you at Shoppingsquare.com.au
Estimated Handling Time: 5 - 10 Working Days

Kingston KVR16N11/8 8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 240-Pin DIMM Ram Memory

JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
8000MHz fCK for 1600Mb/sec/pin
8 independent internal banks
Programmable CAS latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch

Description

DESCRIPTION

This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES:

• JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 8000MHz fCK for 1600Mb/sec/pin
• 8 independent internal banks
• Programmable CAS latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
• Bi-directional Differential Data Strobe
• Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

UPC : 740617206937

Specifications

CL(IDD)	11 cycles
Row Cycle Time (tRCmin)	48.125ns(min.)
Refresh to Active/Refresh	260ns(min.)
Row Active Time (tRASmin)	35ns(min.)
Maximum Operating Power	TBD W*
UL Rating	94 V - 0
Operating Temperature	0o C to +85o C
Storage Temperature	-55o C to +100o C
UPC	740617206937