Kingston 4GB DDR3 1600MHz CL11 SODIMM 1.35v

( Code: P58147 )
Deal: $ 49.95 GST Inc.
Availability: Out Of Stock (Coming Soon)
  • Estimated Postage:
  • Your Postcode:
  • Delivery & Handling:    $9.99
  • Shipped from Australia
  • Combine Shipping and Save
  • Estimated Handling Time: 5 - 10 Working Days

Kingston 4GB DDR3 1600MHz CL11 SODIMM 1.35v

  • 4GB Module - DDR3L 1600MHz
  • Part Number: KVR16LS11/4
  • Specs: DDR3L, 1600MHz, Non-ECC, CL11, 1.35V, Unbuffered, SODIMM

Description

DESCRIPTION
This document describes ValueRAM's 512M x 64-bit (4GB)
DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low
voltage, memory module, based on eight 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
204-pin SODIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~
1.575V) Power Supply
• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component
UPC : 740617219784

Specifications

CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.)
Row Active Time (tRASmin) 35ns (min.)
Maximum Operating Power (1.35V) = 2.376 W*
UL Rating 94 V - 0
UPC 740617219784

Register Interest

Enter your email address to be notified when this product becomes available.

Email: