DIGITALK BATTERY TESTER MODEL MW223
This product is a very versatile tester, and can be used with alkaline. Ni-Cd. or Ni-MH
batteries of the following sizes: AAA. AA. C. D. and 9V. One battery can be tested each
time, and its strength is shown on the meter of the tester.
Operating Instruction
1. ) For testing AAA. AA. C, or D size batteries, insert the battery into the tester, and take
note of the polarity Press the tester to make sure that the battery is connected
property.
2. ) For testing 9V batteries, turn the battery tester upside down, and insert the battery to
the connector at the bottom of the tester, and hold the battery securely.
3. ) The meter on the battery tester shows the status of the battery.
• At the "Replace* position, alkaline batteries need to be replaced, and Ni-Cd / Ni-MH
batteries need to be recharged
• At the "Weak" position, batteries have limited strength left
• At the "Good" position, batteries have adequate strength
4. ) Remove the battery from the battery charger when testing is completed.
Warning
1 ) Do not use with leaking / damaged batteries
2.) Avoid shaking the battery tester, as this may damage the