♣ CLEAR TO SEE YOUR VISITORS DAY & NIGHT: The wide angle lens, HD camera, and infrared night vision help you to see your visitors clearly no matter day or night.

♣ INSTANT ALERT: Get instant alerts when visitors press the doorbell or when the built-in motion sensor is triggered. Never miss any visitors and secure your home all the day.

♣ CONVENIENT 2-WAY AUDIO INTERCOM: Built-in microphone and speaker with noise cancellation allows hearing and talking to your visitors from a cell phone or tableting remotely. Answer your door wherever you are.

♣ REAL-TIME VIDEO MONITOR: View live video of your front porch at any time anywhere. Or playback to check when necessary. Keep an eye on your home easily.

Features:

• Clear Vision: 166° Wide-angle lens, 720P HD camera, and IR night vision function, you can see your visitors before opening the door day and night.
• 2-way Audio Intercom: Hear and talk to visitors from cellphone clearly, answer your door though you are out.
• Instant Alerts: Send alerts instantly to the chime or cellphone to let you know you have visitors.
• Live View: View HD live video of the front door anytime from your phone.
• PIR Motion Detection: Send alert and record video clips when motion detection is triggered.
• Photo Capture & Video Record: Require it to capture a photo or record a video via the APP and saved on your phone.
• 3-way Power Supply: Get power by rechargeable batteries, wired AC or USB cable.
• Resolution: 1280 * 720
• Field of view angle: 166°
• Infrared lamp: 6 * 850mm
• Wi-Fi: IEEE802.11b / g / n
• Storage: 8G / 16G / 32G (Not included SD card)
• Audio: the Two-way conversation with noise cancellation
• Battery: Two 18650 batteries (Not included).
• Notifications: Push notifications in one second
• Device wake-up: within 60ms
• Power consumption: standby 200uA, working 170mA

Setup Steps:

• Download “XSHCam” APP and install.
• Open APP and tap “ADD DEVICE”.
• Power on the doorbell by charging it with USB cable or input batteries.
• Check the LED on doorbell flashing RED. If not, reset the doorbell. Then tap “THE RED LIGHT IS FLASHING”.
• Tap “ENTER THE CONFIGURATION INTERFACE”.
• Connect the WiFi named “TOSEE_**-**-**”.
• Return to APP and tap “NEXT”.
• Tap your WiFi; Input the WiFi password; Tap “NEXT”.
• Set a password for the doorbell; Tap “NEXT”.
• Set a name for this doorbell; Tap “CONFIRM”; Done.

Notes:

• The batteries are rechargeable which can be recharged in the doorbell with a USB cable.
• The doorbell can only work with 2.4G WiFi. Do not support 5G.
• 2 x 18650 Batteries not included. Once you put the Batteries inside the unit charge it for 8 hours or more using a Micro USB cable not provided with the unit.
• Batteries not included