Kingston 8GB (4GB x2) DDR3 1333MHz Non-ECC CL9 Desktop Ram Kit

( Code: P45192 )
Deal: $ 64.95 GST Inc.
$99.00 Save: $34.05 (34%) Availability: Out Of Stock (Coming Soon)
  • Estimated Postage:
  • Your Postcode:
  • Delivery & Handling:    $9.99
  • Shipped from Australia
  • Combine Shipping and Save
  • Estimated Handling Time: 3 - 10 Working Days

Kingston 8GB (4GB x2) DDR3 1333MHz  Non-ECC CL9 DIMM (Kit of 2) Desktop Ram (KVR1333D3N9K2/8G)

  • • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • • VDDQ = 1.5V (1.425V ~ 1.575V)
  • • 667MHz fCK for 1333Mb/sec/pin
  • • 8 independent internal bank
  • • Programmable CAS Latency: 9, 8, 7, 6
  • • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • • 8-bit pre-fetch
  • • Burst Length: 8 (Interleave without any limit, sequential with
  • starting address “000” only), 4 with tCCD = 4 which does not
  • allow seamless read or write [either on the fly using A12 or
  • MRS]
  • • Bi-directional Differential Data Strobe
  • • Internal(self) calibration: Internal self calibration through ZQ
  • pin (RZQ : 240 ohm ± 1%)
  • • On Die Termination using ODT pin
  • • Average Refresh Period 7.8us at

Description

ValueRAM's KVR1333D3N9K2/8G is a kit of two 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory modules, based on sixteen 256M x 8-bit DDR3-1333 FBGA components per module. Total kit capacity is 8GB. The SPD's are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.

UPC : 740617148374

Specifications

CL(IDD) 9 cycles
Row Cycle Time (tRCmin) Row Cycle Time (tRCmin)
Refresh to Active/RefreshCommand Time (tRFCmin) 160ns (min.)
Row Active Time (tRASmin) 36ns (min.)
Power (Operating) 1.410 W* (per module)
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C
UPC 740617148374

Package Content

  • Kingston 8GB (4GB x2) 1333MHz DDR3 Non-ECC CL9 DIMM Desktop Ram

1 Year Warranty in Australia

All images are used for illustration purposes only. Actual item may slightly varies

Picture and specifications are for illustration purposes only. Actual product may differ from that pictured.

While every attempt is made to ensure the information provided on this page is accurate, specifications change from time to time and we are not liable.

Register Interest

Enter your email address to be notified when this product becomes available.

Email: