*The specification is subject to change without notice

TECHNICAL SPECIFICATIONS:

ATM

• PPPoA (RFC 2364) and PPPoA Bridged mode

• PPPoE (RFC 2516) and PPPoE Bridged mode

• IPoA (RFC 2225)

• Bridged mode over AAL5 (RFC2684/1483)

• ATM Forum UNI 3.1 / 4.0 compliant PVCs

• UBR and CBR with traffic shaping

• OAM F4/F5 loopback cells

Bridging

• IEEE 802.1d self-learning bridge

• Learning up to 4096 MAC addresses

• Transparent Bridging between 10/100 Mb

Ethernet and USB

Routing

• NAT / PAT allows multiple users to share

Internet access

• UPnP IGD with NAT traversal capability

• Port Forwarding: users can setup multiple virtual

servers (e.g., Web, FTP, Mail servers) on the

local network.

• Static routing & dynamic routing RIPv1/v2

• DNS Relay, Dynamic DNS

• DHCP Client/Relay/Server

• IGMP Proxy

• Support IP/Bridge QoS for different traffic classes

• Support reservation of bandwidth to guarantee

voice quality of VoIP applications.

Security

• PAP, CHAP, and MS-CHAP for PPP authentication

• Firewall based on incoming & outgoing filtering

of IP address/Port number/Protocol type

• Ping blocking from WAN

• DMZ hosting

Supported Applications

• Application Level Gateways preset for Auth/Ident, DNS, FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET, TFTP & WEB servers. Multiple Virtual Servers can be setup in local network.

• VPN passthrough

• NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player, CuSeeMe, online gaming.

Configuration and Management

• Embedded web configuration interface with password protection

• Remote management control

• Telnet session for local or remote management

• System events logging

• DSL connection diagnostics

• Firmware upgrade via web browser

• User setting backup & restore

Hardware Interface

• One RJ-11 port for ADSL connection

• IEEE 802.11g and 802.11b Wireless LAN interface

• Four Ethernet ports for IEEE 802.3/802.3u 10/100 Base-T auto-sensing, auto cross-over

• One USB port compliant to USB v1.1

• One hidden reset button for restoring factory default settings

Chipset

• Broadcom BCM6348 single-chip ADSL2+ with integrated MIPS32 CPU, transceiver & Analog Front End

• Broadcom BCM4318 single-chip 802.11g wireless LAN solution

Wireless LAN

• Supports IEEE 802.11g and 802.11b

• Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g and 11, 5.5, 2, 1 Mbps for 802.11b

• Diversity antenna system: one external antenna and one internal antenna

• Maximum RF output power: 15dBm for 802.11g

• Coverage Area:

802.11g: LOS (Outdoors): Max. 50 meters;

Indoors: Max. 20 meters

802.11b: LOS (Outdoors): Max. 180 meters;

Indoors: Max. 60 meters

• Support WEP (Wired Equivalent Privacy) RC4 with

64-bit or 128-bit key length

• Support Access Control List, only registered WLAN

clients are allowed

• Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed

WAP/WPA2. Support SSID stealthing

• Support repeater function to extend coverage

• Support client isolation for wireless hotspot

• Support SSID stealthing

Regulatory Approval and Compliance

• ACA

• Telecom New Zealand PTC270

Power Requirement and Operation

Environment Requirement

• Power Adaptor: Output 12 VAC, 1A

• Power Consumption: less than 10 W

• Ambient Temperature: 0 to 40°C

• Relative Humidity: 20% to 90% (non-condensing)

Physical

• Dimensions: 190mm(L) x 130mm(W) x 40mm(H)

• Weight: 350g

ADSL

• ANSI T1.413 Issue 2

• ITU G.992.1 Annex A (G.dmt)

• ITU G.992.2 Annex A (G.lite)

• ITU G.994.1 (G.hs)

• Support dying gasp

• Maximum Rate: 8 Mbps downstream and

1 Mbps upstream

ADSL2

• ITU G.992.3 Annex A (G.dmt)

• ITU G.992.4 Annex A (G.lite)

• Maximum Rate: 12 Mbps downstream and

1 Mbps upstream

ADSL2+

• ITU G.992.5 Annex A (G.dmt)

• Maximum Rate: 24 Mbps downstream and

1.2 Mbps upstream